Detailed Product Description

The switching Media Converters with Link Fault Signaling (LFS) provide the means for an SNMP-Managed switch to recognize a failure on a fiber channel or twisted-pair connection, enabling the switch to automatically route to a backup path if the connected switch is equipped with Spanning Tree Algorithm. This intelligence maximizes the power of managed switches, and enables fail-safe design solutions for complex networks. These converters also extend the maximum singlemode fiber distance, spanning over 46 miles.

The built-in 10/100 switch enables the fiber cable connection to operate at 100 Mbps connected to either a 10BaseT or a 100BaseTX network, while remaining completely 100BaseFX standard-compliant. Fiber connection can also operate in full duplex mode whether the RJ-45 port is connected to a full duplex switch or a half duplex hub, with the built-in switch providing the network segmentation that permits the maximum fiber distance.  Each Media Converter provides a 10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector port featuring store-and-forward switching architecture. Auto-MDIX capability on the twisted-pair port allows for convenient connections. A USB power connector on the rear panel provides additional power options where AC power outlets are unavailable.

KEY FEATURES

·    Built-in Twisted-Pair Port 10/100 Switch

·    Auto-negotiation RJ-45 Connector with Auto-MDIX

·    SC, ST, MT-RJ or SC Connector

·    LEDs for Functions, Links & Activity

·    Link Fault Signaling For Use with Managed Switches

·    USB Power Option For Added Convenience

·    Store-and-Forward Architecture

·    Full and Half Duplex Operation

·    Singlemode Spans up to 75 Km

·    Wall or Chassis-mountable

·    IEEE 802.3 and IEEE 802.3u Compliant

SPECIFICATIONS

·    APPLICABLE STANDARDS

   IEEE 802.3 10BaseT

   IEEE 802.3u 100BaseTX

IEEE 802.3u 100BaseFX

·    FIXED PORTS

1 Auto-MDIX twisted-pair port meeting IEEE 802.3 10BaseT & IEEE 802.3u 100BaseTX standard specifications; Category 5 or better cable, 100 meters maximum distance for 100BaseTX, Category 3 or better cable, 100 meters maximum distance for 10BaseT

plus

1 fiber optic port meeting IEEE 802.3u 100BaseFX standard specification; 62.5/125 or 50/125 micron multimode fiber optic cable, 2,000 meters maximum distance

or

1 fiber optic port meeting IEEE 802.3u 100BaseFX standard specification; 9/125 micron singlemode fiber optic cable, spanning: 15 kilometers maximum distance

or

40 kilometers maximum distance

or

75 kilometers maximum distance 

·   LED INDICATORS

   Per Unit: Power status, RJ-45 port speed

   Per Port: LNK/ACT, FDX/COL

   Six LEDs total

·   PERFORMANCE

   Latency: < 4.2 µs (LIFO)

   Throughput @ 100Base: 148,809 pps (64-byte packets)

Speed: 100BaseTX: 100/200 Mbps for half/full duplex

            10BaseT: 10/20 Mbps for half/full duplex

Switching Method: Store-and-Forward

Maximum MAC Addresses: 1,024 entries

Memory: 256 KB

·    FIBER INTERFACE, MULTIMODE MODELS

Type: LED

Wavelength: 1300 nm nominal (1270 nm maximum, 1380 nm minimum)

Maximum Output Power: - 14.0 dBm

Minimum Output Power: - 20.0 dBm

Sensitivity: -33.0 dBm

Maximum Input Power: - 8.0 dBm

Link Power Budget: 13.0 dB

·    FIBER INTERFACE, SINGLEMODE PN 065-1120LFS

Type: MQW Laser

Wavelength: 1300 nm nominal (1260 nm maximum, 1360 nm minimum)

Maximum Output Power: - 7.0 dBm

Minimum Output Power: - 15.0 dBm

Sensitivity: -34.0 dBm

Maximum Input Power: - 7.0 dBm

Link Power Budget: 19.0 dB

·    FIBER INTERFACE, SINGLEMODE PN 065-1120EDLFS

Type: MQW Laser

Wavelength: 1300 nm nominal (1261 nm maximum, 1360 nm minimum)

Maximum Output Power: - 5.0 dBm

Minimum Output Power: - 12.0 dBm

Sensitivity: -35.0 dBm

Maximum Input Power: - 5.0 dBm

Link Power Budget: 23.0 dB

·    FIBER INTERFACE, SINGLEMODE PN 065-1120XLDLFS

Type: MQW Laser

Wavelength: 1300 nm nominal (1270 nm maximum, 1350 nm minimum)

Maximum Output Power: + 3.0 dBm

Minimum Output Power: - 3.0 dBm

Sensitivity: -37.0 dBm

Maximum Input Power: - 0.0 dBm

Link Power Budget: 34.0 dB

·   PHYSICAL CHARACTERISTICS

Case dimensions: 4.33"L x 3.19"W x 0.91"H (110mm x 81mm x 23mm)

Fiber connector protrusion varies with model.

Weight: 0.33 pounds (150 grams)

·    ENVIRONMENTAL CHARACTERISTICS

Operating Temperature: 32°F ~ 104°F (0°C ~ 40°C)

Storage Temperature: -13°F ~ 158°F (-25°C ~ 70°C)

Relative Humidity: 10 ~ 90%, non-condensing

·    POWER

External power adapter: 12 Volts DC; 600 mA

Power Consumption: 5 Watts Maximum

USB power connector on the rear panel optionally powers converter from computer's USB port.

·    EMISSIONS

      FCC part 15 Class A, CISPR Class A, VCCI Class A, CE Mark

·   SAFETY

UL Listed